ISL97634IRT26Z-T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Number of Pins | 8 |
| Weight | 50.008559mg |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Frequency | 1.4MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 40mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Current | 1.5mA |
| Quiescent Current | 1μA |
| Topology | Boost |
| Interface IC Type | LED DISPLAY DRIVER |
| Number of Segments | 7 |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 700μm |
| Length | 2mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
ISL97634IRT26Z-T Overview
For the design of these LED drivers, 1 outputs are used.Based on the frequency of 1.4MHz, it operates.For its operation, terminations with a value of 0 are used.A configuration of this chip is made up of 8 pins.It is estimated that there are 7 segments.There is a device mounted on the Surface Mount.8 pins are available on the device.The Display Drivers is also assigned based on its characteristics.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 1.5mA.The operating temperature should not exceed 85°C to ensure stable operation.As a condition for achieving stable operation, the operating temperature should be greater than -40°C.It is necessary to have 5.5V voltages inside systems to power them.When operating with a 40mA output current, the LED driver delivers all the benefits.There is no external factor that can consume current, so 1μA current is consumed.The interface IC for this part is marked with the LED DISPLAY DRIVER.
ISL97634IRT26Z-T Features
Frequency of 1.4MHz
Supply voltage of 3V
Operating with the supply voltage of 5.5V
ISL97634IRT26Z-T Applications
There are a lot of Intersil (Renesas Electronics America) ISL97634IRT26Z-T LED Driver ICs applications.
- LED backlight driver for LCD displays for portable equipment
- High-end retail lighting
- Auxiliary lights for on-vehicle cameras
- Panel lighting
- Scanners and Handy Terminals
- Down lights
- Museum lighting
- LED headlights
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
