ISO1H801GAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | ISOFACE™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISO1H801 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Current - Output (Max) | 625mA |
| Nominal Supply Current | 4.5mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Output Current per Channel | 700mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 15V~30V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 120 µs |
| Output Peak Current Limit-Nom | 0.415A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 170 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 15V |
| Supply Voltage1-Max | 30V |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ISO1H801GAUMA1 Overview
Tape & Reel (TR) is how it's packaged.The 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package contains it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is Relay, Solenoid Driver.Ensure reliable operation by setting the temperature to -25°C~125°C TJ.It is possible to use 8 outputs in the lighting driver.To operate, it needs a supply voltage of 4.5V~5.5V.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.It is part of the ISO1H801 family of LED drivers.In total, there are 36 terminations.For operation, 36 pins are used.It contains 1 functions.The maximum output of the LED driving board is 625mAV.The maximum output current must drop to 1.4A to meet the operation criteria.Using a voltage of 5V allows for high efficiency.In total, it has 36 pins.In this LED driving board, there is 150mOhm resistance.It is part of the ISOFACE? series.Vsup (maximum supply voltage) is set to 5.5V.Normal operation requires Vsup above 4.5V.
ISO1H801GAUMA1 Features
Supplied from 5V
Resistance of 150mOhm
ISO1H801GAUMA1 Applications
There are a lot of Infineon Technologies ISO1H801GAUMA1 Power Switches ICs applications.
- USB Protection
- Portable Devices
- Low Voltage I/O System Power
- Hard Disk Drives
- Set-top-box
- HDD, SSD
- Various applications equipped with buttons
- Hot Swap
- Wireless Headsets
- Portable Music Players
