ISO1H801GXT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | ISOFACE™ |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | Parallel |
| Current - Output (Max) | 625mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 15V~30V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 120 µs |
| Output Peak Current Limit-Nom | 0.415A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 170 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Supply Voltage1-Min | 15V |
| Supply Voltage1-Max | 30V |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| RoHS Status | Non-RoHS Compliant |
ISO1H801GXT Overview
As a result, it is packaged in the form of a Tape & Reel (TR).This package is included in 36-BSSOP (0.433, 11.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.It owns Relay, Solenoid Driver switch type.The LED driver has 8 outputs.A voltage of 4.5V~5.5V is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Auto Restart.It contains 36 terminations.It consists of 1 functions.In this case, the LED driving board can produce only 625mAV as its maximum output.It is possible to obtain high efficiency with a supply voltage of 5V.There is an electrical component included in the ISOFACE? series.Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must be maintained above 4.5V.
ISO1H801GXT Features
Supplied from 5V
ISO1H801GXT Applications
There are a lot of Infineon Technologies ISO1H801GXT Power Switches ICs applications.
- Portable Devices
- Storage Drives
- Portable/Handheld Devices
- USB Protection
- Mobile Communication Devices
- Solid State Drivers
- USB3.1 Power Delivery
- PC Cards
- Telecom and Network Systems
- PC Card Hot Swap
