banner_page

ISO1H802G

515/30V N-Channel 0.65mm PMIC ISOFACE? Series ISO1H802 38 Pin 5V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad


  • Manufacturer: Infineon Technologies
  • Nocochips NO: 376-ISO1H802G
  • Package: 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 477
  • Description: 515/30V N-Channel 0.65mm PMIC ISOFACE? Series ISO1H802 38 Pin 5V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
Number of Pins 38
Operating Temperature -25°C~125°C TJ
Packaging Tape & Reel (TR)
Published 1999
Series ISOFACE™
JESD-609 Code e3
Feature Auto Restart
Pbfree Code yes
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 36
ECCN Code EAR99
Resistance 150mOhm
Terminal Finish MATTE TIN
Subcategory Peripheral Drivers
Max Power Dissipation 3.3W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ISO1H802
Pin Count 36
JESD-30 Code R-PDSO-G36
Number of Outputs 8
Output Type N-Channel
Max Output Current 625mA
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 515/30V
Supply Voltage-Min (Vsup) 4.5V
Interface SPI
Nominal Supply Current 4.5mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 4.5V~5.5V
Max Supply Current 4.5mA
Switch Type Relay, Solenoid Driver
Ratio - Input:Output 1:8
Voltage - Load 15V~30V
Driver Number of Bits 8
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Turn On Time 120 μs
Output Peak Current Limit-Nom 2.2A
Rds On (Typ) 150m Ω
Turn Off Time 170 μs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SINK
Supply Voltage1-Min 15V
Supply Voltage1-Max 30V
Height Seated (Max) 3.5mm
Length 15.9mm
Width 11mm
Radiation Hardening No
RoHS Status RoHS Compliant

ISO1H802G Overview


As a result, it is packaged in the form of a Tape & Reel (TR).There is a package for it in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.The lighting driver has the mounting type Surface Mount.A Relay, Solenoid Driver switch type is owned by it.To ensure reliable operation, set the temperature to -25°C~125°C TJ.The LED driver is equipped with 8 outputs.With a supply voltage of 4.5V~5.5V, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.In terms of features, the LED driving board has Auto Restart.It belongs to the family ISO1H802.It contains 36 terminations.It is necessary to use the 38 pins in order to operate the LED driver.It consists of 1 functions.Maximum output current falls to 625mA when operation criteria are met.High efficiency is possible at 5V supply voltage.The lighting driver is mounted in the direction of Surface Mount.As a result, it has a total of 36 pins.Currently, the LED driving board has a resistance of 150mOhm ohms.This electrical component is part of the ISOFACE? series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.Vsup (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.515/30V is the power supply of the part.For its operation, a current of 4.5mA is required.

ISO1H802G Features


Supplied from 5V
Resistance of 150mOhm

ISO1H802G Applications


There are a lot of Infineon Technologies ISO1H802G Power Switches ICs applications.

  • Wireless Modem Data Cards
  • USB Ports/Hubs
  • Portable Video Game Players
  • Handheld Devices
  • Telecom and Network Systems
  • Smartphone and PDA
  • Gaming
  • Portable/Handheld Devices
  • Storage (HDDs, SSDs)
  • Notebook and Tablet Computers

Write a review

Note: HTML is not translated!
    Bad           Good