ISO1H811GAUMA1
| Parameters | |
|---|---|
| Nominal Supply Current | 4.5mA |
| Output Configuration | High Side |
| Output Current | 625mA |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Output Current per Channel | 700mA |
| Rise Time | 64μs |
| Fall Time (Typ) | 89 μs |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~35V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Number of Drivers | 8 |
| Turn On Time | 120 µs |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 150m Ω |
| Turn Off Time | 170 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Supply Voltage1-Min | 15V |
| Supply Voltage1-Max | 30V |
| Height Seated (Max) | 3.5mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | ISOFACE™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ISO1H811 |
| Pin Count | 36 |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Power Supplies | 3.3/515/30V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | Parallel |
| Current - Output (Max) | 625mA |
ISO1H811GAUMA1 Overview
It is packaged in the form of a Tape & Reel (TR).Package 36-BSSOP (0.433, 11.00mm Width) Exposed Pad contains it.This lighting drivere has a mounting type of Surface Mount.A Relay, Solenoid Driver switch type is owned by it.Keeping the temperature at -25°C~125°C TJ ensures reliable operation.In order to operate, it requires a voltage supply of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Auto Restart features.There is a ISO1H811 family of things that it belongs to.A total of 36 terminations can be found in it.The operation is performed through the 36 pins.It has 1 functions.There is a maximum output of 625mAV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 1.4A.Supply voltages of 3.3V allow for high efficiency.A total of 36 pins are present on it.150mOhm is the resistance of the lighting driver.This electrical component is included in the ISOFACE? series.As a result, the output current is set to 625mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 3V.In this part, the power supply is set to 3.3/515/30V.8 drivers are available for the part.
ISO1H811GAUMA1 Features
Supplied from 3.3V
Resistance of 150mOhm
ISO1H811GAUMA1 Applications
There are a lot of Infineon Technologies ISO1H811GAUMA1 Power Switches ICs applications.
- Low Voltage I/O System Power
- USB Protection
- Wireless/Networking Cards
- Hard Disk Drives
- Portable GPS
- Set-top-box
- Portable Devices
- Telecom and Network Systems
- Wearable Devices
- USB Ports/Hubs
