ISO1H815GAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | ISOFACE™ |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Galvanic Isolation, Status Flag |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 150mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.635mm |
| Base Part Number | ISO1H815 |
| Pin Count | 36 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Power Supplies | 3.3/515/30V |
| Interface | Parallel |
| Nominal Supply Current | 4.5mA |
| Output Configuration | High Side |
| Output Current | 1.2A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Switch Type | Relay, Solenoid Driver |
| Halogen Free | Halogen Free |
| Output Current per Channel | 1.4A |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 11V~35V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 4.4A |
| Rds On (Typ) | 150m Ω |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ISO1H815GAUMA1 Overview
The package is in the form of a Tape & Reel (TR).The 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.There is a Relay, Solenoid Driver switch type associated with it.It is best to set the temperature to -25°C~125°C TJ to ensure reliable operation.It is possible to use 8 outputs in the lighting driver.The LED driving board operates with a supply voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.As far as features are concerned, the LED driving board has Auto Restart, Galvanic Isolation, Status Flag.As you can see, it comes from the ISO1H815 family.A total of 36 terminations can be found in it.For operation, we use the 36 pins.To comply with the operation criteria, the maximum output current is reduced to 3A.The LED driver has a total of 36 pins.In this case, there is 150mOhm resistance in the LED driving board.A component of this type is included in the ISOFACE? series.In this case, the output current will be set to 1.2A.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.This part has a power supply of 3.3/515/30V volts.
ISO1H815GAUMA1 Features
Resistance of 150mOhm
ISO1H815GAUMA1 Applications
There are a lot of Infineon Technologies ISO1H815GAUMA1 Power Switches ICs applications.
- Storage Drives
- Smartphone and PDA
- Notebook PC
- Portable GPS Device
- Portable GPS
- Hot Swap
- Notebook and Tablet Computers
- USB Ports/Hubs
- Wireless Headsets
- Portable Music Players
