ISO2H823V25XUMA1
| Parameters | |
|---|---|
| Width | 12mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 70-VFQFN Exposed Pad |
| Number of Pins | 70 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1996 |
| Series | ISOFACE™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 70 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 1.5W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 8 |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.75V |
| Interface | SPI, Parallel |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 2.75V~3.6V |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 11V~35V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 30 μs |
| Output Peak Current Limit-Nom | 1A |
| Rds On (Typ) | 210m Ω |
| Turn Off Time | 30 μs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height Seated (Max) | 0.9mm |
| Length | 12mm |
ISO2H823V25XUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).This package is included in 70-VFQFN Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 8 outputs available on this lighting driver.It uses a supply voltage of 2.75V~3.6V to operate.A maximum output voltage of P-Channel volts can be achieved by this LED driver.A total of 70 terminations have been recorded.In order to operate, the 70 pins are used.It consists of 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.It is mounted in the way of Surface Mount.This electrical component can be found in the ISOFACE? series.The lighting driver is configured to have a maximum supply voltage of 3.6V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.75V.
ISO2H823V25XUMA1 Features
Supplied from 3.3V
ISO2H823V25XUMA1 Applications
There are a lot of Infineon Technologies ISO2H823V25XUMA1 Power Switches ICs applications.
- PC Cards
- Notebook PC
- HDD and SSD
- Smart Phones, Feature Phones
- Low Voltage I/O System Power
- Wearable Devices
- Hot Swaps
- USB Ports/Hubs
- HDD, SSD
- Portable GPS Device
