banner_page

ISO8200B

0.65mm PMIC ISO82 36 Pin 24V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-ISO8200B
  • Package: 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 843
  • Description: 0.65mm PMIC ISO82 36 Pin 24V 36-BSSOP (0.433, 11.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 8 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 36-BSSOP (0.433, 11.00mm Width) Exposed Pad
Number of Pins 36
Operating Temperature -40°C~125°C TJ
Packaging Tube
JESD-609 Code e3
Feature Auto Restart, Galvanic Isolation, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 36
Termination Gull Wing
ECCN Code EAR99
Resistance 120mOhm
Terminal Finish Matte Tin (Sn) - annealed
Terminal Position DUAL
Peak Reflow Temperature (Cel) 245
Number of Functions 1
Supply Voltage 24V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ISO82
Max Output Current 700mA
Operating Supply Voltage 45V
Voltage 36V
Interface Parallel
Max Supply Voltage 6.5V
Min Supply Voltage 3V
Current 700mA
Output Configuration High Side
Output Current 700mA
Turn On Delay Time 17 μs
Switch Type Relay, Solenoid Driver
Max Input Voltage 36V
Rise Time 5μs
Fall Time (Typ) 5 μs
Nominal Input Voltage 36V
Turn-Off Delay Time 22 μs
Ratio - Input:Output 1:1
Voltage - Load 10.5V~36V
Fault Protection Current Limiting (Fixed), Over Temperature
Number of Drivers 8
Output Peak Current Limit-Nom 1.1A
Rds On (Typ) 120m Ω
Max Junction Temperature (Tj) 125°C
Turn Off Time 40 µs
Built-in Protections TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE
Height 3.6mm
Length 16mm
Width 11.1mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

ISO8200B Overview


It is package in Tube case.There is a 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package that includes it.Mounting type Surface Mount is selected for the LED driving board.There is a Relay, Solenoid Driver switch type associated with it.Ensure reliable operation by setting the temperature to -40°C~125°C TJ.The lighting driver has Auto Restart, Galvanic Isolation, Status Flag features.This object belongs to the ISO82 family.It contains 36 terminations.The 36 pins are used to operate the LED driver.It has 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.With a supply voltage of 24V, high efficiency is possible.The lighting driver is mounted in the way of Surface Mount.120mOhm is the resistance of the lighting driver.When this case is used, the output current is set to 700mA.In order to achieve the best efficiency, the supply voltage should be set to 45V.There is a maximum input voltage of 36V volts.In terms of supply voltage, it is capable of handling a maximum of 6.5V volts.Alternatively, 3V volts can be used if needed.There are 8 drivers associated with this part.

ISO8200B Features


Supplied from 24V
Resistance of 120mOhm

ISO8200B Applications


There are a lot of STMicroelectronics ISO8200B Power Switches ICs applications.

  • Set-Top Boxes
  • Wireless Headsets
  • Notebook PC
  • PDAs
  • Solid State Drivers
  • Hot-Swap Systems
  • USB Power Distribution
  • Wearable Devices
  • Portable/Handheld Devices
  • PC Card Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good