ISO8200BTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Feature | Auto Restart, Galvanic Isolation, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| Termination | Gull Wing |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.65mm |
| Base Part Number | ISO82 |
| Number of Outputs | 8 |
| Max Output Current | 700mA |
| Interface | Parallel |
| Max Supply Voltage | 45V |
| Nominal Supply Current | 9mA |
| Output Configuration | High Side |
| Output Current | 700mA |
| Propagation Delay | 40 ns |
| Switch Type | Relay, Solenoid Driver |
| Max Input Voltage | 36V |
| Turn-Off Delay Time | 22 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 1.1A |
| Rds On (Typ) | 120m Ω |
| Turn Off Time | 40 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ISO8200BTR Overview
The LED driver's packaged as a Cut Tape (CT).There is a package for it in the 36-BSSOP (0.433, 11.00mm Width) Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.Relay, Solenoid Driver is the switch type it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.The LED driver has a total of 8 outputs.A lighting driver with Auto Restart, Galvanic Isolation, Status Flag features is available.The ISO82 family contains this object.In total, there are 36 terminations.The operation is performed through the 36 pins.It has 1 functions.This operation requires the maximum output current to be decreased to 700mA.It is possible to achieve a high level of efficiency with a supply voltage of 24V.Surface Mount is mounted in the way.This case results in a 700mA output current.This LED driver can handle voltages up to 36V volts.In addition to 45VV, it can handle other voltages as well.
ISO8200BTR Features
Supplied from 24V
ISO8200BTR Applications
There are a lot of STMicroelectronics ISO8200BTR Power Switches ICs applications.
- Hot Swap
- Set-top-box
- PC Cards
- Portable Video Game Players
- USB Protection
- Smartphone and PDA
- Hot Swap
- Wireless Headsets
- Wireless/Networking Cards
- Portable GPS
