ISP452HUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISP452 |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 700mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 160m Ω |
| Built-in Protections | TRANSIENT |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
ISP452HUMA1 Overview
Tape & Reel (TR) is how it's packaged.There is a TO-261-4, TO-261AA package that includes it.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.The temperature should be set to -30°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a ISP452 family of things that it belongs to.In total, there are 4 terminations.As far as the lighting driver is concerned, there are 1 functions.700mAV is the maximum output of the LED driver.With a supply voltage of 13.5V, high efficiency is possible.4 pins are equipped with it.The miniPROFET? series includes this electrical component.In this LED driver, the maximum supply voltage is configured to be 34V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 5V.
ISP452HUMA1 Features
Supplied from 13.5V
ISP452HUMA1 Applications
There are a lot of Infineon Technologies ISP452HUMA1 Power Switches ICs applications.
- USB Ports/Hubs
- USB Protection
- Telecom and Network Systems
- USB3.1 Power Delivery
- HDD, SSD
- USB Power Distribution
- Hard Disk Drives
- PC Cards
- Portable Devices
- Portable GPS
