ISP772TFUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -30°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISP772 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 2.6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 230 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
ISP772TFUMA1 Overview
Tape & Reel (TR) is how it's packaged.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.There is a General Purpose switch type associated with it.The temperature should be set to -30°C~85°C TA to ensure reliable functioning.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Auto Restart.This object belongs to the ISP772 family.It has a total of 8 terminations.It is important to note that the LED driving board has 1 functions.The LED driver output is limited to 2.6AV.Supply voltages of 13.5V allow for high efficiency.As a result, it has a total of 8 pins.It is part of the miniPROFET? series.In this LED driver, the maximum supply voltage is configured to be 34V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 5V.
ISP772TFUMA1 Features
Supplied from 13.5V
ISP772TFUMA1 Applications
There are a lot of Infineon Technologies ISP772TFUMA1 Power Switches ICs applications.
- Smartphone and PDA
- Notebook PC
- USB Ports/Hubs
- Wearable Devices
- PC Cards
- Portable Devices
- Smart Phones, Feature Phones
- Portable/Handheld Devices
- Hot-Swap Systems
- Portable Music Players
