ISPGAL22LV10-5LK
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | ispGAL™22LV10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22LV10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Nominal Supply Current | 130mA |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 5 ns |
| Architecture | PAL-TYPE |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 3V~3.6V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
ISPGAL22LV10-5LK Overview
There are 10 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).There is a 28-SSOP (0.209, 5.30mm Width) package containing it.The device is programmed with 10 I/O ports.The termination of a device is set to [0].There is a DUALterminal position on the electrical part in question.An electrical supply voltage of 3.3V is used to power it.This part is part of the family [0].Package the chip by Tube.During operation, the operating temperature is kept at 0°C~75°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.It belongs to the ispGAL?22LV10series of FPGAs.It is equipped with 28 pin count.According to the ISPGAL22LV10, its related parts can be found.High efficiency requires a voltage supply of [0].Surface Mountis used to mount this electronic component.The pins are [0].It operates at a maximum supply voltage of 3.6V volts.It is powered by 3Vas its minimum supply voltage.The frequency that can be achieved is 200MHz.Input signals are detected by 11dedicated inputs.It is configured to produce 10outputs.It is associated with 132product terms.
ISPGAL22LV10-5LK Features
28-SSOP (0.209, 5.30mm Width) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
10 outputs
ISPGAL22LV10-5LK Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22LV10-5LK CPLDs applications.
- PULSE WIDTH MODULATION (PWM)
- POWER-SAVING MODES
- DDC INTERFACE
- White goods (Washing, Cold, Aircon ,...)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Software Configuration of Add-In Boards
- Random logic replacement
- Custom shift registers
- Address decoders
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
