ISPGAL22V10AB-5LNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22V10A |
| Pin Count | 32 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 2.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Programmable Type | In System Programmable |
| Number of I/O | 10 |
| Clock Frequency | 143MHz |
| Propagation Delay | 5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISPGAL22V10AB-5LNI Overview
This network has 10macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).It is part of the 32-VFQFN Exposed Pad package.The device is programmed with 10 I/Os.The termination of a device is set to [0].QUADis the terminal position of this electrical part.A voltage of 2.5Vprovides power to the device.There is a part included in Programmable Logic Devices.Trayshould be used to package the chip.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The ispGAL?22V10series comprises this type of FPGA.In this chip, the 32pins are programmed.According to the ISPGAL22V10A, its related parts can be found.In order for the device to operate, it requires 2.5V power supplies.In this case, the maximum supply voltage (Vsup) reaches 2.7V.The status of input signals is determined by 11dedicated inputs.The supply voltage (Vsup) should be greater than 2.3V.It is recommended that the clock frequency not exceed 143MHz.This device is configured to output [0].This product has a total of 132 terms associated with it.This device uses 22 inputs.
ISPGAL22V10AB-5LNI Features
32-VFQFN Exposed Pad package
10 I/Os
The operating temperature of -40°C~85°C TA
32 pin count
2.5V power supplies
10 outputs
ISPGAL22V10AB-5LNI Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10AB-5LNI CPLDs applications.
- I2C BUS INTERFACE
- Interface bridging
- Complex programmable logic devices
- ToR/Aggregation/Core Switch and Router
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Battery operated portable devices
- Synchronous or asynchronous mode
- Configurable Addressing of I/O Boards
- Storage Cards and Storage Racks
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
