ISPGAL22V10AB-75LNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22V10A |
| Pin Count | 32 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 2.7V |
| Power Supplies | 2.5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Programmable Type | In System Programmable |
| Number of I/O | 10 |
| Propagation Delay | 7.5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 2.3V~2.7V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISPGAL22V10AB-75LNI Overview
The mobile phone network has 10 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].The device is programmed with 10 I/O ports.32terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 2.5V.There is a part in the family [0].Trayis the packaging method.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.The ispGAL?22V10series comprises this type of FPGA.With 32pins programmed, the chip is ready to use.There are related parts in [0].This device runs on 2.5Vvolts of electricity.Vsup reaches 2.7Vas the maximum supply voltage.A total of 11dedicated inputs are available for the purpose of detecting input signals.It should be possible for Vsup to exceed 2.3Vat the supply voltage.A 10output is configured for this device.There are 132 product terms associated with it.22inputs are used by the device.
ISPGAL22V10AB-75LNI Features
32-VFQFN Exposed Pad package
10 I/Os
The operating temperature of -40°C~85°C TA
32 pin count
2.5V power supplies
10 outputs
ISPGAL22V10AB-75LNI Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10AB-75LNI CPLDs applications.
- Boolean function generators
- PLC analog input modules
- DDC INTERFACE
- Digital multiplexers
- Power Meter SMPS
- Configurable Addressing of I/O Boards
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Software-driven hardware configuration
- Auxiliary Power Supply Isolated and Non-isolated
