ISPGAL22V10AC-75LNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22V10A |
| Pin Count | 32 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.95V |
| Power Supplies | 1.8V |
| Supply Voltage-Min (Vsup) | 1.65V |
| Programmable Type | In System Programmable |
| Number of I/O | 10 |
| Propagation Delay | 7.5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 1.65V~1.95V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISPGAL22V10AC-75LNI Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.It is contained in package [0].In this case, there are 10 I/Os programmed.The device is programmed with 32 terminations.This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 1.8V is used to power it.It belongs to the family [0].Ideally, the chip should be packaged by Tray.Ensure its reliability by operating at [0].Ensure that the chip is mounted by Surface Mount.It belongs to the ispGAL?22V10series of FPGAs.With 32pins programmed, the chip is ready to use.In accordance with the [0], its related parts are listed.A total of 1.8V power supplies are needed to run it.A maximum supply voltage (Vsup) of 1.95V is provided.To detect the status of input signals, there are 11dedicated inputs.If the supply voltage (Vsup) is greater than 1.65V, then the device will work properly.This device is configured to output [0].It is equipped with 132 product terms.The inputs employed are 22.
ISPGAL22V10AC-75LNI Features
32-VFQFN Exposed Pad package
10 I/Os
The operating temperature of -40°C~85°C TA
32 pin count
1.8V power supplies
10 outputs
ISPGAL22V10AC-75LNI Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10AC-75LNI CPLDs applications.
- Synchronous or asynchronous mode
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Configurable Addressing of I/O Boards
- Interface bridging
- Page register
- Timing control
- USB Bus
- Pattern recognition
- DDC INTERFACE
- ROM patching
