ISPGAL22V10AV-5LJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22V10A |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 10 |
| Nominal Supply Current | 90mA |
| Propagation Delay | 5 ns |
| Architecture | PAL-TYPE |
| Max Frequency | 200MHz |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 4.57mm |
| Length | 11.5062mm |
| Width | 11.5062mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
ISPGAL22V10AV-5LJ Overview
10macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The product is contained in a 28-LCC (J-Lead) package.The device has 10inputs and outputs.There are 28 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.QUADis the terminal position of this electrical part.Power is provided by a supply voltage of 3.3V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tube.During operation, the operating temperature is kept at 0°C~75°C TA to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In this case, it is a type of FPGA belonging to the ispGAL?22V10 series.With 28pins programmed, the chip is ready to use.According to the ISPGAL22V10A, its related parts can be found.This electronic part is mounted in the way of Surface Mount.The device is designed with pins [0].A maximum voltage of 3.6Vis required for operation.The device is designed to operate with a minimal supply voltage of 3VV.It should be below 200MHzat the maximal frequency.The status of input signals is determined by 11dedicated inputs.It is configured to produce 10outputs.It has been associated with 132product terms.
ISPGAL22V10AV-5LJ Features
28-LCC (J-Lead) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
10 outputs
ISPGAL22V10AV-5LJ Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10AV-5LJ CPLDs applications.
- Protection relays
- ON-CHIP OSCILLATOR CIRCUIT
- Reset swapping
- TIMERS/COUNTERS
- Handheld digital devices
- Pattern recognition
- Page register
- I/O PORTS (MCU MODULE)
- Parity generators
- State machine design
