ISPGAL22V10AV-75LNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPGAL22V10A |
| Pin Count | 32 |
| JESD-30 Code | S-XQCC-N32 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 10 |
| Propagation Delay | 7.5 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Product Terms | 132 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | Non-RoHS Compliant |
ISPGAL22V10AV-75LNI Overview
In the mobile phone network, there are 10macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 32-VFQFN Exposed Pad package.The device is programmed with 10 I/O ports.The device is programmed with 32 terminations.This electrical part has a terminal position of QUADand is connected to the ground.It is powered by a voltage of 3.3V volts.This part is in the family [0].Tubeshould be used to package the chip.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.There should be a Surface Mounton the chip.The ispGAL?22V10series FPGA is one of these types.A chip with 32pins is programmed.Its related parts can be found in the [0].It runs on a voltage of 3.3Vvolts.In this case, the maximum supply voltage (Vsup) reaches 3.6V.To detect input signals, there are 11 dedicated inputs.A supply voltage (Vsup) of greater than 3V should be used.The output is configured with the value [0].The product has 132 product terms.This device uses 22 inputs.
ISPGAL22V10AV-75LNI Features
32-VFQFN Exposed Pad package
10 I/Os
The operating temperature of -40°C~85°C TA
32 pin count
3.3V power supplies
10 outputs
ISPGAL22V10AV-75LNI Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10AV-75LNI CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- STANDARD SERIAL INTERFACE UART
- Custom state machines
- USB Bus
- High speed graphics processing
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- TIMERS/COUNTERS
- I/O PORTS (MCU MODULE)
- Voltage level translation
- Code converters
