ISPGAL22V10C-15LK
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~75°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispGAL™22V10 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Frequency | 83.3MHz |
| Base Part Number | ISPGAL22V10 |
| Pin Count | 28 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 10 |
| Nominal Supply Current | 140mA |
| Max Supply Current | 140mA |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Architecture | PAL-TYPE |
| Number of Inputs | 22 |
| Output Function | MACROCELL |
| Number of Macro Cells | 10 |
| Number of Dedicated Inputs | 11 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Number of Product Terms | 132 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
ISPGAL22V10C-15LK Overview
10macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.It is embedded in the 28-SSOP (0.209, 5.30mm Width) package.In this case, there are 10 I/Os programmed.There is a 28terminations set on devices.The terminal position of this electrical part is DUAL, which serves as an important access point for passengers or freight.An electrical supply voltage of 5V is used to power it.It is a part of family [0].As a result, it is packaged as Tube.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispGAL?22V10series FPGA.The chip is programmed with 28 pins.The ISPGAL22V10contains its related parts.For high efficiency, the supply voltage should be maintained at [0].A Surface Mountis mounted on this electronic component.There are 28 pins on the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.The minimal supply voltage is 4.75V.This device runs on 5Vvolts of electricity.It is possible to achieve a frequency of 83.3MHz.A total of 11dedicated inputs are available for the purpose of detecting input signals.The output configuration is set to [0].There are 132 product terms, which are conjunction of literals, where each literal is either a variable or its negation.The inputs employed are 22.In order to operate the device, a maximum current of 140mAmust be provided.
ISPGAL22V10C-15LK Features
28-SSOP (0.209, 5.30mm Width) package
10 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
10 outputs
ISPGAL22V10C-15LK Applications
There are a lot of Lattice Semiconductor Corporation ISPGAL22V10C-15LK CPLDs applications.
- Complex programmable logic devices
- Battery operated portable devices
- STANDARD SERIAL INTERFACE UART
- PLC analog input modules
- Power automation
- Cross-Matrix Switch
- Discrete logic functions
- USB Bus
- Software-Driven Hardware Configuration
- ToR/Aggregation/Core Switch and Router
