ISPLSI 1016E-80LJNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1016 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 32 |
| Clock Frequency | 57MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 4.572mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1016E-80LJNI Overview
64 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.It is embedded in the 44-LCC (J-Lead) package.There are 32 I/Os programmed in it.44terminations are programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.There is 5V voltage supply for this device.There is a part included in Programmable Logic Devices.It is recommended to package the chip by Tube.A reliable operation is ensured by the operating temperature of [0].Ensure that the chip is mounted by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 1000E series.44pins are programmed on the chip.You can find its related parts in the [0].2000gates are devices that serve as building blocks for digital circuits.A total of 16logic elements/blocks are present.A total of 5V power supplies are needed to run it.Initially, the maximum supply voltage (Vsup) is 5.5V.It is recommended that the supply voltage (Vsup) be greater than 4.5V.It is recommended that the clock frequency not exceed 57MHz.
ISPLSI 1016E-80LJNI Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
5V power supplies
ISPLSI 1016E-80LJNI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1016E-80LJNI CPLDs applications.
- Digital designs
- Code converters
- Address decoding
- Power up sequencing
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Dedicated input registers
- INTERRUPT SYSTEM
- Voltage level translation
- Portable digital devices
- Software-Driven Hardware Configuration
