ISPLSI 1024-90LJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| Series | ispLSI® 1000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1024 |
| Pin Count | 68 |
| JESD-30 Code | S-PQCC-N68 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 48 |
| Clock Frequency | 58.8MHz |
| Propagation Delay | 17 ns |
| Number of Gates | 4000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 12ns |
| Number of Logic Elements/Blocks | 24 |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1024-90LJ Overview
The mobile phone network has 64 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).You can find it in package [0].This device has 48 I/O ports programmed into it.It is programmed to terminate devices at [0].The terminal position of this electrical component is QUAD.A voltage of 5Vprovides power to the device.The part belongs to Programmable Logic Devices family.Tubeis the packaging method.Due to its reliability, it is operated at a temperature of [0].Chips should be mounted by Surface Mount.The ispLSI? 1000series FPGA is one of these types.It is equipped with 68 pin count.The ISPLSI 1024contains its related parts.In digital circuits, 4000gates serve as building blocks.24logic elements/blocks exist.It runs on a voltage of 5Vvolts.Supply voltage (Vsup) reaches a maximum of 5.25V.Input signals are detected by 2dedicated inputs.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.The clock frequency of this device should not exceed 58.8MHz.
ISPLSI 1024-90LJ Features
68-LCC (J-Lead) package
48 I/Os
The operating temperature of 0°C~70°C TA
68 pin count
5V power supplies
ISPLSI 1024-90LJ Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1024-90LJ CPLDs applications.
- Voltage level translation
- Boolean function generators
- Custom state machines
- I/O expansion
- Digital multiplexers
- USB Bus
- Address decoding
- DMA control
- Digital systems
- PULSE WIDTH MODULATION (PWM)
