ISPLSI 1032-60LTI
| Parameters | |
|---|---|
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 38MHz |
| Propagation Delay | 25 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 4 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 20ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | ispLSI® 1000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
ISPLSI 1032-60LTI Overview
There are 128 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).In the 100-LQFPpackage, you will find it.As you can see, this device has 64 I/O ports programmed into it.It is programmed to terminate devices at [0].This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.This part is part of the family [0].It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at [0].There should be a Surface Mounton the chip.In FPGA terms, it is a type of ispLSI? 1000series FPGA.There are 100pins on the chip.This device can also display [0].The ISPLSI 1032can be used to identify its related parts.As a building block for digital circuits, there are 6000gates.This logic block consists of 32logic elements.There is 5V power supply available for it.A maximum supply voltage (Vsup) of 5.5V is provided.To detect input signals, there are 4 dedicated inputs.The supply voltage (Vsup) should be greater than 4.5V.Ideally, its clock frequency should not exceed 38MHz.
ISPLSI 1032-60LTI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
5V power supplies
ISPLSI 1032-60LTI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032-60LTI CPLDs applications.
- Multiple DIP Switch Replacement
- Programmable polarity
- PLC analog input modules
- USB Bus
- ToR/Aggregation/Core Switch and Router
- I/O expansion
- Bootloaders for FPGAs
- Interface bridging
- Address decoding
- Voltage level translation
