ISPLSI 1032E-100LT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 71MHz |
| Propagation Delay | 12.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1032E-100LT Overview
128 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is packaged with 100-LQFP.As a result, it has 64 I/O ports programmed.There are 100 terminations programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.A voltage of 5Vprovides power to the device.This part is in the family [0].It is recommended to package the chip by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the ispLSI? 1000E series.Chips are programmed with 100 pins.You can find its related parts in the [0].In digital circuits, there are 6000gates, which act as a basic building block.32logic elements/blocks exist.The system runs on a power supply of 5V watts.Supply voltage (Vsup) reaches a maximum of 5.25V.The status of input signals is determined by 2dedicated inputs.It is important that the supply voltage (Vsup) exceeds 4.75VV.The clock frequency should not exceed 71MHz.
ISPLSI 1032E-100LT Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 1032E-100LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032E-100LT CPLDs applications.
- LED Lighting systems
- I/O PORTS (MCU MODULE)
- Software-driven hardware configuration
- Handheld digital devices
- I/O expansion
- Digital multiplexers
- Programmable polarity
- Page register
- POWER-SAVING MODES
- Battery operated portable devices
