ISPLSI 1032E-125LTN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 91MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1032E-125LTN Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).A 100-LQFP package contains the item.The device has 64inputs and outputs.It is programmed to terminate devices at [0].This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.Power is provided by a supply voltage of 5V volts.There is a part included in Programmable Logic Devices.It is packaged in the way of Tray.A reliable operation is ensured by the operating temperature of [0].It is recommended that Surface Mountholds the chip in place.The ispLSI? 1000Eseries FPGA is one of these types.The chip is programmed with 100 pins.The ISPLSI 1032indicates that its related parts can be found.A digital circuit is built using 6000gates.There are a total of 32 logic elements or blocks.There is 5V power supply available for it.A maximum supply voltage (Vsup) of 5.25V is provided.Input signals are detected by 2dedicated inputs.In order to operate properly, the supply voltage (Vsup) should be greater than 4.75V.The clock frequency of the device should not exceed 91MHz.
ISPLSI 1032E-125LTN Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 1032E-125LTN Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032E-125LTN CPLDs applications.
- Programmable power management
- LED Lighting systems
- Handheld digital devices
- PULSE WIDTH MODULATION (PWM)
- I2C BUS INTERFACE
- Code converters
- Power automation
- TIMERS/COUNTERS
- I/O PORTS (MCU MODULE)
- Storage Cards and Storage Racks
