ISPLSI 1032E-70LT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 56MHz |
| Propagation Delay | 17.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1032E-70LT Overview
Currently, there are 128 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As you can see, this device has 64 I/O ports programmed into it.It is programmed that device terminations will be 100 .This electrical component has a terminal position of 0.The device is powered by a voltage of 5V volts.The part belongs to Programmable Logic Devices family.Trayis the packaging method.To ensure reliability, the device operates at a temperature of [0].There should be a Surface Mounton the chip.In this case, it is a type of FPGA belonging to the ispLSI? 1000E series.The chip is programmed with 100 pins.The ISPLSI 1032shows its related parts.It is possible to construct digital circuits using 6000gates, which are devices that serve as building blocks.32logic elements/blocks exist.A power supply of 5Vis required to operate it.A maximum supply voltage (Vsup) of 5.5V is provided.The status of input signals is detected by 2dedicated inputs.A supply voltage (Vsup) of greater than 4.5V should be used.Ideally, its clock frequency should not exceed 56MHz.
ISPLSI 1032E-70LT Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 1032E-70LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032E-70LT CPLDs applications.
- PLC analog input modules
- Programmable polarity
- Custom shift registers
- Protection relays
- Boolean function generators
- Storage Cards and Storage Racks
- Discrete logic functions
- Handheld digital devices
- Random logic replacement
- DDC INTERFACE
