ISPLSI 1032E-70LTN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 56MHz |
| Propagation Delay | 17.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1032E-70LTN Overview
This network has 128macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with 100-LQFP.The device is programmed with 64 I/Os.100terminations are programmed into the device.This electrical part has a terminal position of QUADand is connected to the ground.It is powered from a supply voltage of 5V.This part is in the family [0].Trayshould be used for packaging the chip.It operates with the operating temperature of 0°C~70°C TA to ensure its reliability.Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the ispLSI? 1000E series.In this chip, the 100pins are programmed.The ISPLSI 1032contains its related parts.In digital circuits, there are 6000gates, which act as a basic building block.There are 32 logic elements/blocks.In order for the device to operate, it requires 5V power supplies.In order to ensure proper operation, a maximum supply voltage (Vsup) of 5.25V is required.To detect the status of input signals, there are 2dedicated inputs.It is important that the supply voltage (Vsup) exceeds 4.75VV.clock frequency should not exceed [0].
ISPLSI 1032E-70LTN Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 1032E-70LTN Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032E-70LTN CPLDs applications.
- Preset swapping
- Storage Cards and Storage Racks
- ToR/Aggregation/Core Switch and Router
- ON-CHIP OSCILLATOR CIRCUIT
- STANDARD SERIAL INTERFACE UART
- I2C BUS INTERFACE
- Address decoding
- Software-Driven Hardware Configuration
- Custom state machines
- Auxiliary Power Supply Isolated and Non-isolated
