ISPLSI 1032E-70LTNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 56MHz |
| Propagation Delay | 17.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1032E-70LTNI Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 100-LQFP package contains the item.In this case, there are 64 I/Os programmed.The termination of a device is set to [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.Power is supplied by a voltage of 5V volts.It belongs to the family [0].As a result, it is packaged as Tray.The temperature at which it operates is set to -40°C~85°C TAin order to ensure its reliability.It is mounted in the way of Surface Mount.It is a type of FPGA belonging to the ispLSI? 1000E series.In this chip, the 100pins are programmed.The ISPLSI 1032contains its related parts.In digital circuits, 6000gates serve as building blocks.There are 32 logic elements or blocks present.A total of 5V power supplies are needed to run it.Supply voltage (Vsup) reaches a maximum of 5.5V.The status of input signals is detected by 2dedicated inputs.Voltage supply (Vsup) should be higher than 4.5V.Its clock frequency should not exceed 56MHz.
ISPLSI 1032E-70LTNI Features
100-LQFP package
64 I/Os
The operating temperature of -40°C~85°C TA
100 pin count
5V power supplies
ISPLSI 1032E-70LTNI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032E-70LTNI CPLDs applications.
- Cross-Matrix Switch
- ToR/Aggregation/Core Switch and Router
- POWER-SAVING MODES
- Wide Vin Industrial low power SMPS
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Voltage level translation
- Multiple Clock Source Selection
- Digital systems
- Boolean function generators
- Programmable polarity
