ISPLSI 1032EA-125LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000EA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 100MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1032EA-125LT100 Overview
There are 128 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).The item is enclosed in a 100-LQFP package.It is equipped with 64I/O ports.It is programmed to terminate devices at [0].The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.The operating temperature of the machine is 0°C~70°C TA to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In terms of FPGAs, it belongs to the ispLSI? 1000EA series.In this chip, the 100pins are programmed.This device can also display [0].The ISPLSI 1032indicates that its related parts can be found.In digital circuits, there are 6000gates, which act as a basic building block.A logic element or block has 32elements.In order for the device to operate, it requires 3.3/55V power supplies.In this case, the maximum supply voltage (Vsup) reaches 5.25V.The input signals are detected by 2dedicated inputs.There should be a higher supply voltage (Vsup) than 4.75V.Ideally, its clock frequency should not exceed 100MHz.
ISPLSI 1032EA-125LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3/55V power supplies
ISPLSI 1032EA-125LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032EA-125LT100 CPLDs applications.
- ROM patching
- I/O expansion
- DMA control
- Reset swapping
- D/T registers and latches
- Storage Cards and Storage Racks
- Digital systems
- Custom shift registers
- Programmable power management
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
