ISPLSI 1032EA-170LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000EA |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 125MHz |
| Propagation Delay | 5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1032EA-170LT100 Overview
There are 128 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 100-LQFPpackage, you will find it.There are 64 I/Os on the board.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.The power supply voltage is 5V.It belongs to the family [0].Trayis the packaging method.To ensure reliability, the device operates at a temperature of [0].The chip should be mounted by Surface Mount.FPGAs belonging to the ispLSI? 1000EAseries contain this type of chip.There are 100pins on the chip.Its related parts can be found in the [0].A digital circuit can be constructed using 6000gates.A logic element or block has 32elements.The system runs on a power supply of 3.3/55V watts.In this case, the maximum supply voltage (Vsup) is 5.25V.To detect input signals, there are 2 dedicated inputs.The supply voltage (Vsup) should be greater than 4.75V.It should not exceed 125MHzin terms of clockfrequency.
ISPLSI 1032EA-170LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3/55V power supplies
ISPLSI 1032EA-170LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032EA-170LT100 CPLDs applications.
- Dedicated input registers
- State machine control
- Portable digital devices
- PULSE WIDTH MODULATION (PWM)
- Voltage level translation
- Multiple Clock Source Selection
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- STANDARD SERIAL INTERFACE UART
- Programmable power management
- Discrete logic functions
