ISPLSI 1032EA-200LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000EA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1032 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 143MHz |
| Propagation Delay | 4.5 ns |
| Number of Gates | 6000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 2 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 4.5ns |
| Number of Logic Elements/Blocks | 32 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1032EA-200LT100 Overview
128macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.You can find it in package [0].As you can see, this device has 64 I/O ports programmed into it.100terminations have been programmed into the device.The terminal position of this electrical component is QUAD.The power source is powered by 5Vvolts.There is a part in the family [0].It is packaged in the way of Tray.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.As part of the ispLSI? 1000EAseries, it is a type of FPGA.It is programmed with 100 pins.The device can also be used to find [0].The ISPLSI 1032can be used to identify its related parts.6000gates are used to construct digital circuits.This logic block consists of 32logic elements.It operates from 3.3/55V power supplies.Supply voltage (Vsup) reaches a maximum of 5.25V.The status of input signals is determined by 2dedicated inputs.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.The clock frequency should not exceed 143MHz.
ISPLSI 1032EA-200LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3/55V power supplies
ISPLSI 1032EA-200LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1032EA-200LT100 CPLDs applications.
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Power automation
- Digital multiplexers
- Cross-Matrix Switch
- Page register
- Multiple DIP Switch Replacement
- INTERRUPT SYSTEM
- Protection relays
- I/O expansion
