ISPLSI 1048C-50LQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 1996 |
| Series | ispLSI® 1000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 34.5MHz |
| Propagation Delay | 26 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 24ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048C-50LQ Overview
In the mobile phone network, there are 192macro cells, which are cells with high-power antennas and towers.The item is enclosed in a 128-BQFP package.As you can see, this device has 96 I/O ports programmed into it.There are 128 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.It is powered by a voltage of 5V volts.This part is included in Programmable Logic Devices.It is packaged in the way of Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispLSI? 1000series FPGA.It has 128pins programmed.The ISPLSI 1048contains its related parts.A digital circuit is built using 8000gates.This logic block consists of 48logic elements.A power supply of 5Vvolts is required to operate this device.In this case, the maximum supply voltage (Vsup) is 5.5V.There are 8 dedicated inputs used to detect the status of input signals.If the supply voltage (Vsup) is greater than 4.5V, then the device will work properly.It should not exceed 34.5MHzin its clock frequency.
ISPLSI 1048C-50LQ Features
128-BQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048C-50LQ Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048C-50LQ CPLDs applications.
- Software Configuration of Add-In Boards
- Custom shift registers
- Digital multiplexers
- Digital systems
- Bootloaders for FPGAs
- DDC INTERFACE
- Address decoders
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Storage Cards and Storage Racks
- Complex programmable logic devices
