ISPLSI 1048E-100LT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 71MHz |
| Propagation Delay | 12.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-100LT Overview
Currently, there are 192 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.It is contained in package [0].The device is programmed with 96 I/O ports.The device is programmed with 128 terminations.As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.This part is in the family [0].Ideally, the chip should be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.FPGAs belonging to the ispLSI? 1000Eseries contain this type of chip.In this chip, the 128pins are programmed.There are related parts in [0].As a building block for digital circuits, there are 8000gates.A logic element or block has 48elements.A power supply of 5Vvolts is required to operate this device.Vsup reaches 5.25Vas the maximum supply voltage.There are 8 dedicated inputs used to detect the status of input signals.The supply voltage (Vsup) should be greater than 4.75V.It should not exceed 71MHzin terms of clockfrequency.
ISPLSI 1048E-100LT Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-100LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-100LT CPLDs applications.
- ON-CHIP OSCILLATOR CIRCUIT
- Digital designs
- ROM patching
- INTERRUPT SYSTEM
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- LED Lighting systems
- D/T registers and latches
- ToR/Aggregation/Core Switch and Router
- Code converters
- Programmable polarity
