ISPLSI 1048E-100LTN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 71MHz |
| Propagation Delay | 12.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1048E-100LTN Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).There is a 128-LQFP package containing it.There are 96 I/Os on the board.128terminations have been programmed into the device.QUADis the terminal position of this electrical part.A voltage of 5Vprovides power to the device.It is a part of the family [0].It is recommended that the chip be packaged by Tray.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that the chip be mounted by Surface Mount.It belongs to the ispLSI? 1000Eseries of FPGAs.A chip with 128pins is programmed.The ISPLSI 1048can be used to identify its related parts.The 8000gates serve as building blocks for digital circuits.This logic block consists of 48logic elements.A power supply of 5Vis required to operate it.5.25Vrepresents the maximal supply voltage (Vsup).A total of 8dedicated inputs are available for detecting the status of input signals.Ensure that the supply voltage (Vsup) exceeds 4.75V.A frequency of 71MHzshould not be exceeded by its clock.
ISPLSI 1048E-100LTN Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-100LTN Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-100LTN CPLDs applications.
- Multiple Clock Source Selection
- Preset swapping
- Software Configuration of Add-In Boards
- Power automation
- Programmable power management
- White goods (Washing, Cold, Aircon ,...)
- PLC analog input modules
- High speed graphics processing
- Synchronous or asynchronous mode
- Complex programmable logic devices
