ISPLSI 1048E-125LQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 91MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-125LQ Overview
The mobile phone network has 192 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 128-BQFP package.The device has 96inputs and outputs.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.It is powered by a voltage of 5V volts.There is a part in the family [0].It is recommended to package the chip by Tray.To ensure its reliability, the operating temperature is set to [0].Surface Mountshould be used for mounting the chip.As part of the ispLSI? 1000Eseries, it is a type of FPGA.It has 128pins programmed.Its related parts can be found in the [0].A digital circuit is built using 8000gates.48logic elements/blocks exist.In order for the device to operate, it requires 5V power supplies.A maximum supply voltage (Vsup) of 5.25V is provided.The status of input signals is detected by 8dedicated inputs.The supply voltage (Vsup) should be greater than 4.75V.The clock frequency should not exceed 91MHz.
ISPLSI 1048E-125LQ Features
128-BQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-125LQ Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-125LQ CPLDs applications.
- Field programmable gate
- Software-driven hardware configuration
- State machine design
- Address decoding
- PLC analog input modules
- State machine control
- Multiple DIP Switch Replacement
- LED Lighting systems
- Voltage level translation
- Code converters
