ISPLSI 1048E-125LTN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 91MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1048E-125LTN Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is packaged with 128-LQFP.There are 96 I/Os on the board.The device is programmed with 128 terminations.There is a QUADterminal position on the electrical part in question.It is powered from a supply voltage of 5V.This part is in the family [0].The chip should be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.It is recommended that the chip be mounted by Surface Mount.In terms of FPGAs, it belongs to the ispLSI? 1000E series.A chip with 128pins is programmed.The ISPLSI 1048contains its related parts.It is possible to construct digital circuits using 8000gates, which are devices that serve as building blocks.There are 48 logic elements/blocks.The system runs on a power supply of 5V watts.In this case, the maximum supply voltage (Vsup) reaches 5.25V.It has 8dedicated inputs for detecting input signals.It is recommended that the supply voltage (Vsup) be greater than 4.75V.This device should not have an clock frequency greater than 91MHz.
ISPLSI 1048E-125LTN Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-125LTN Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-125LTN CPLDs applications.
- Cross-Matrix Switch
- Digital systems
- STANDARD SERIAL INTERFACE UART
- Handheld digital devices
- Multiple Clock Source Selection
- D/T registers and latches
- Discrete logic functions
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Programmable polarity
- DDC INTERFACE
