ISPLSI 1048E-50LQI
| Parameters | |
|---|---|
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 42MHz |
| Propagation Delay | 24.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 20ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
ISPLSI 1048E-50LQI Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is embedded in the 128-BQFP package.In this case, there are 96 I/Os programmed.128terminations have been programmed into the device.The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.It is powered from a supply voltage of 5V.This part is in the family [0].It is packaged in the way of Tray.The device operates at a temperature of -40°C~85°C TAin order to ensure its reliability.The chip should be mounted by Surface Mount.The ispLSI? 1000Eseries FPGA is one of these types.With 128pins programmed, the chip is ready to use.The ISPLSI 1048indicates that its related parts can be found.8000gates are devices that serve as building blocks for digital circuits.There are 48 logic elements or blocks present.It runs on a voltage of 5Vvolts.In this case, the maximum supply voltage (Vsup) is 5.5V.The status of input signals is determined by 8dedicated inputs.Ensure that the supply voltage (Vsup) exceeds 4.5V.The clock frequency should not exceed 42MHz.
ISPLSI 1048E-50LQI Features
128-BQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
5V power supplies
ISPLSI 1048E-50LQI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-50LQI CPLDs applications.
- Dedicated input registers
- PLC analog input modules
- I/O PORTS (MCU MODULE)
- Software-driven hardware configuration
- Configurable Addressing of I/O Boards
- Multiple DIP Switch Replacement
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Preset swapping
- Storage Cards and Storage Racks
