ISPLSI 1048E-50LT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 42MHz |
| Propagation Delay | 24.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 20ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-50LT Overview
There are 192 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.In the 128-LQFPpackage, you will find it.As you can see, this device has 96 I/O ports programmed into it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.There is 5V voltage supply for this device.This part is in the family [0].Trayshould be used for packaging the chip.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.In FPGA terms, it is a type of ispLSI? 1000Eseries FPGA.Chips are programmed with 128 pins.It is also possible to find YESwhen using this device.The ISPLSI 1048indicates that related parts can be found.For digital circuits, there are 8000gates. These devices serve as building blocks.There are 48 logic elements/blocks.It runs on 5Vvolts of power.A maximum supply voltage (Vsup) of 5.25V is provided.It has 8dedicated inputs for detecting input signals.It should be possible for Vsup to exceed 4.75Vat the supply voltage.It should not exceed 42MHzin its clock frequency.
ISPLSI 1048E-50LT Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-50LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-50LT CPLDs applications.
- DDC INTERFACE
- DMA control
- STANDARD SERIAL INTERFACE UART
- TIMERS/COUNTERS
- Page register
- Power automation
- Discrete logic functions
- Wide Vin Industrial low power SMPS
- Battery operated portable devices
- Digital multiplexers
