ISPLSI 1048E-70LQI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 56MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-70LQI Overview
There are 192 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 128-BQFPpackage, you will find it.There are 96 I/Os on the board.There are 128 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.A voltage of 5Vprovides power to the device.This part is in the family [0].The chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Chips should be mounted by Surface Mount.It belongs to the ispLSI? 1000Eseries of FPGAs.128pins are programmed on the chip.Its related parts can be found in the [0].As a building block for digital circuits, there are 8000gates.This logic element/block contains 48logic elements.In order for the device to operate, it requires 5V power supplies.Vsup reaches 5.5Vas the maximum supply voltage.There are 8 dedicated inputs used to detect the status of input signals.It is important that the supply voltage (Vsup) exceeds 4.5VV.Ideally, its clock frequency should not exceed 56MHz.
ISPLSI 1048E-70LQI Features
128-BQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
5V power supplies
ISPLSI 1048E-70LQI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-70LQI CPLDs applications.
- Address decoding
- USB Bus
- Power automation
- Dedicated input registers
- Power Meter SMPS
- I/O expansion
- Portable digital devices
- Custom shift registers
- Software Configuration of Add-In Boards
- Synchronous or asynchronous mode
