ISPLSI 1048E-70LQNI
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-BQFP |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 56MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | RoHS Compliant |
ISPLSI 1048E-70LQNI Overview
192macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.A 128-BQFP package contains the item.It is programmed with 96 I/Os.The device is programmed with 128 terminations.Its terminal position is QUAD.A voltage of 5Vprovides power to the device.This part is part of the family [0].As a result, it is packaged as Tray.To ensure reliability, the device operates at a temperature of [0].Ideally, the chip should be mounted by Surface Mount.This type of FPGA is a part of the ispLSI? 1000E series.There are 128 pins on the chip.You can find its related parts in the [0].8000gates are devices that serve as building blocks for digital circuits.In total, there are 48 logic elements/blocks.The system runs on a power supply of 5V watts.Vsup reaches 5.5Vas the maximum supply voltage.To detect the status of input signals, there are 8dedicated inputs.There should be a higher supply voltage (Vsup) than 4.5V.It should not exceed 56MHzin terms of clockfrequency.
ISPLSI 1048E-70LQNI Features
128-BQFP package
96 I/Os
The operating temperature of -40°C~85°C TA
128 pin count
5V power supplies
ISPLSI 1048E-70LQNI Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-70LQNI CPLDs applications.
- Digital multiplexers
- Auxiliary Power Supply Isolated and Non-isolated
- Reset swapping
- STANDARD SERIAL INTERFACE UART
- POWER-SAVING MODES
- Digital designs
- Programmable power management
- D/T registers and latches
- State machine control
- Code converters
