ISPLSI 1048E-70LT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 56MHz |
| Propagation Delay | 18.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 15ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048E-70LT Overview
A mobile phone network consists of 192macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).The product is contained in a 128-LQFP package.This device has 96 I/O ports programmed into it.128terminations have been programmed into the device.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.Power is provided by a supply voltage of 5V volts.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Ideally, the chip should be mounted by Surface Mount.In FPGA terms, it is a type of ispLSI? 1000Eseries FPGA.Chips are programmed with 128 pins.According to the ISPLSI 1048, its related parts can be found.The 8000gates serve as building blocks for digital circuits.48logic blocks/elements are present.There is 5V power supply available for it.In this case, the maximum supply voltage (Vsup) is 5.25V.There are 8 dedicated inputs used to detect the status of input signals.Voltage supply (Vsup) should be higher than 4.75V.The clock frequency of this device should not exceed 56MHz.
ISPLSI 1048E-70LT Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
5V power supplies
ISPLSI 1048E-70LT Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048E-70LT CPLDs applications.
- Address decoders
- Digital designs
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Wide Vin Industrial low power SMPS
- Handheld digital devices
- Power automation
- Multiple DIP Switch Replacement
- White goods (Washing, Cold, Aircon ,...)
- Code converters
- Digital systems
