ISPLSI 1048EA-100LT128
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000EA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 77MHz |
| Propagation Delay | 12.5 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 1048EA-100LT128 Overview
There are 192 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).128-LQFPis the package in which it resides.There are 96 I/Os programmed in it.Devices are programmed with terminations of [0].This electrical part is wired with a terminal position of QUAD.A voltage of 5V is used as the power supply for this device.The part is included in Programmable Logic Devices.Trayis the packaging method.Ensure its reliability by operating at [0].It is recommended that Surface Mountholds the chip in place.In this case, it is a type of FPGA belonging to the ispLSI? 1000EA series.There are 128 pins on the chip.If this device is used, you will also be able to find [0].The ISPLSI 1048indicates that related parts can be found.8000gates are devices that serve as building blocks for digital circuits.There are 48 logic elements or blocks present.A total of 3.3/55V power supplies are needed to run it.In order to ensure proper operation, a maximum supply voltage (Vsup) of 5.25V is required.The status of input signals is detected by 8dedicated inputs.If the supply voltage (Vsup) is greater than 4.75V, then the device will work properly.This device should not have an clock frequency greater than 77MHz.
ISPLSI 1048EA-100LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3/55V power supplies
ISPLSI 1048EA-100LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048EA-100LT128 CPLDs applications.
- Software-driven hardware configuration
- Handheld digital devices
- Dedicated input registers
- TIMERS/COUNTERS
- Cross-Matrix Switch
- Programmable power management
- Protection relays
- Address decoding
- ON-CHIP OSCILLATOR CIRCUIT
- Power Meter SMPS
