ISPLSI 1048EA-125LT128
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 96 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 8000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 192 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 8 |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 48 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 1000EA |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.4mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 1048 |
| Pin Count | 128 |
| JESD-30 Code | S-PQFP-G128 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
ISPLSI 1048EA-125LT128 Overview
A mobile phone network consists of 192macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).A 128-LQFP package contains the item.This device has 96 I/O ports programmed into it.There are 128 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The terminal position of this electrical component is QUAD.A voltage of 5Vprovides power to the device.There is a part included in Programmable Logic Devices.Ideally, the chip should be packaged by Tray.Due to its reliability, it is operated at a temperature of [0].Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the ispLSI? 1000EA series.There are 128 pins on the chip.If you use this device, you will also find [0].You can find its related parts in the [0].In digital circuits, 8000gates serve as building blocks.There are a total of 48 logic elements or blocks.It operates from 3.3/55V power supplies.Initially, the maximum supply voltage (Vsup) is 5.25V.To detect the status of input signals, there are 8dedicated inputs.Voltage supply (Vsup) should be higher than 4.75V.The clock frequency of the device should not exceed 100MHz.
ISPLSI 1048EA-125LT128 Features
128-LQFP package
96 I/Os
The operating temperature of 0°C~70°C TA
128 pin count
3.3/55V power supplies
ISPLSI 1048EA-125LT128 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 1048EA-125LT128 CPLDs applications.
- Digital multiplexers
- PULSE WIDTH MODULATION (PWM)
- Battery operated portable devices
- USB Bus
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- ToR/Aggregation/Core Switch and Router
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Interface bridging
- Handheld digital devices
- Timing control
