ISPLSI 2032A-110LJN44
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ISPLSI 2032 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 32 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 1000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 4.572mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2032A-110LJN44 Overview
The mobile phone network has 32 macro cells, which are cells that provide radio coverage from high-power cell sites (towers, antennas, or masts).The product is contained in a 44-LCC (J-Lead) package.As you can see, this device has 32 I/O ports programmed into it.Terminations of devices are set to [0].The terminal position of this electrical component is QUAD.The device is powered by a voltage of 5V volts.This part is included in Programmable Logic Devices.Tubeshould be used to package the chip.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Ensure that the chip is mounted by Surface Mount.The FPGA belongs to the ispLSI? 2000A series.With 44pins programmed, the chip is ready to use.It is also characterized by YES.The ISPLSI 2032can be used to identify its related parts.1000gates are used to construct digital circuits.8logic elements/blocks exist.It runs on 5Vvolts of power.There is a maximum supply voltage (Vsup) of 5.25V.In order to operate properly, the supply voltage (Vsup) should be greater than 4.75V.A frequency of 77MHzshould not be exceeded by its clock.
ISPLSI 2032A-110LJN44 Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
5V power supplies
ISPLSI 2032A-110LJN44 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2032A-110LJN44 CPLDs applications.
- I/O PORTS (MCU MODULE)
- D/T registers and latches
- Software Configuration of Add-In Boards
- PULSE WIDTH MODULATION (PWM)
- Programmable power management
- Power up sequencing
- Wide Vin Industrial low power SMPS
- USB Bus
- Code converters
- STANDARD SERIAL INTERFACE UART
