ISPLSI 2032A-180LJ44
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2032 |
| Pin Count | 44 |
| JESD-30 Code | S-PQCC-J44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 32 |
| Clock Frequency | 125MHz |
| Propagation Delay | 7.5 ns |
| Number of Gates | 1000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 4.572mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2032A-180LJ44 Overview
There are 32 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).It is contained in package [0].As you can see, this device has 32 I/O ports programmed into it.44terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The device is powered by a voltage of 5V volts.This part is in the family [0].It is recommended that the chip be packaged by Tube.To ensure its reliability, the operating temperature is set to [0].Ideally, the chip should be mounted by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000A series.It is programmed with 44 pins.If this device is used, you will also be able to find [0].The ISPLSI 2032shows its related parts.1000gates are devices that serve as building blocks for digital circuits.There are a total of 8 logic elements or blocks.It runs on a voltage of 5Vvolts.The maximal supply voltage (Vsup) reaches 5.25V.A supply voltage (Vsup) of greater than 4.75V should be used.Ideally, its clock frequency should not exceed 125MHz.
ISPLSI 2032A-180LJ44 Features
44-LCC (J-Lead) package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
5V power supplies
ISPLSI 2032A-180LJ44 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2032A-180LJ44 CPLDs applications.
- Boolean function generators
- Digital multiplexers
- Timing control
- INTERRUPT SYSTEM
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Reset swapping
- D/T registers and latches
- Field programmable gate
- USB Bus
- High speed graphics processing
