ISPLSI 2032E-135LT48
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2032 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 3.3/55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 32 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 1000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 8 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2032E-135LT48 Overview
32 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.In the 48-LQFPpackage, you will find it.There are 32 I/Os on the board.There is a 48terminations set on devices.This electrical part has a terminal position of QUADand is connected to the ground.The power supply voltage is 5V.There is a part included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].Surface Mountshould be used for mounting the chip.In this case, it is a type of FPGA belonging to the ispLSI? 2000E series.In this chip, the 48pins are programmed.Its related parts can be found in the [0].There are 1000 gates, which are devices that acts as a building block for digital circuits. There are 8 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.There is 3.3/55V power supply available for it.Vsup reaches 5.25Vas the maximum supply voltage.Ensure that the supply voltage (Vsup) exceeds 4.75V.It is recommended that the clock frequency not exceed 100MHz.
ISPLSI 2032E-135LT48 Features
48-LQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
48 pin count
3.3/55V power supplies
ISPLSI 2032E-135LT48 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2032E-135LT48 CPLDs applications.
- White goods (Washing, Cold, Aircon ,...)
- Timing control
- Software-driven hardware configuration
- Configurable Addressing of I/O Boards
- Dedicated input registers
- Portable digital devices
- Custom state machines
- State machine design
- I/O expansion
- Cross-Matrix Switch
