ISPLSI 2064A-100LT100
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2064 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2064A-100LT100 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 100-LQFP package.The device is programmed with 64 I/Os.There is a 100terminations set on devices.The terminal position of this electrical component is QUAD.The device is powered by a voltage of 5V volts.It belongs to the family [0].Trayis the packaging method.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].It is recommended that Surface Mountholds the chip in place.FPGAs belonging to the ispLSI? 2000Aseries contain this type of chip.100pins are programmed on the chip.If this device is used, you will also be able to find [0].The ISPLSI 2064indicates that its related parts can be found.In digital circuits, 2000gates serve as building blocks.This logic element/block contains 16logic elements.A power supply of 5Vis required to operate it.There is a maximum supply voltage (Vsup) of 5.25V.Vsup (supply voltage) must be greater than 4.75V.clock frequency should not exceed [0].
ISPLSI 2064A-100LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 2064A-100LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064A-100LT100 CPLDs applications.
- Reset swapping
- Wide Vin Industrial low power SMPS
- Preset swapping
- ROM patching
- Digital designs
- Interface bridging
- PULSE WIDTH MODULATION (PWM)
- Dedicated input registers
- DDC INTERFACE
- PLC analog input modules
