ISPLSI 2064A-100LTN100
| Parameters | |
|---|---|
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 77MHz |
| Propagation Delay | 13 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 10ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2064 |
ISPLSI 2064A-100LTN100 Overview
A mobile phone network consists of 64macro cells, which are radio coverage cells served by a high-power cell site (tower, antenna or mast).There is a 100-LQFP package containing it.The device is programmed with 64 I/O ports.It is programmed that device terminations will be 100 .This electrical part has a terminal position of QUADand is connected to the ground.An electrical supply voltage of 5V is used to power it.There is a part in the family [0].Ideally, the chip should be packaged by Tray.To ensure reliability, the device operates at a temperature of [0].It is mounted in the way of Surface Mount.The ispLSI? 2000Aseries FPGA is one of these types.With 100pins programmed, the chip is ready to use.This device is also capable of displaying [0].ISPLSI 2064contains its related parts.A digital circuit is built using 2000gates.There are 16 logic elements/blocks.A power supply of 5Vvolts is required to operate this device.There is a maximum supply voltage (Vsup) of 5.25V.Vsup (supply voltage) must be greater than 4.75V.A frequency of 77MHzshould not be exceeded by its clock.
ISPLSI 2064A-100LTN100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 2064A-100LTN100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064A-100LTN100 CPLDs applications.
- D/T registers and latches
- Pattern recognition
- Bootloaders for FPGAs
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- INTERRUPT SYSTEM
- Digital systems
- ON-CHIP OSCILLATOR CIRCUIT
- POWER-SAVING MODES
- I/O PORTS (MCU MODULE)
