ISPLSI 2064A-125LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2064 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 100MHz |
| Propagation Delay | 10 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 7.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2064A-125LT100 Overview
There are 64 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).A 100-LQFP package contains the item.As you can see, this device has 64 I/O ports programmed into it.It is programmed that device terminations will be 100 .The terminal position of this electrical part is QUAD, which serves as an important access point for passengers or freight.The power source is powered by 5Vvolts.The part belongs to Programmable Logic Devices family.Ideally, the chip should be packaged by Tray.To ensure its reliability, the operating temperature is set to [0].Ensure that the chip is mounted by Surface Mount.It is a type of FPGA belonging to the ispLSI? 2000A series.A chip with 100pins is programmed.If you use this device, you will also find [0].There are related parts in [0].A digital circuit can be constructed using 2000gates.There are 16 logic elements or blocks present.A power supply of 5Vvolts is required to operate this device.Supply voltage (Vsup) reaches a maximum of 5.25V.The supply voltage (Vsup) should be greater than 4.75V.This device should not have an clock frequency greater than 100MHz.
ISPLSI 2064A-125LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 2064A-125LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064A-125LT100 CPLDs applications.
- Power Meter SMPS
- Custom state machines
- Discrete logic functions
- Power up sequencing
- ANALOG-TO-DIGITAL CONVERTOR (ADC)
- Parity generators
- PLC analog input modules
- Dedicated input registers
- ROM patching
- Wide Vin Industrial low power SMPS
