ISPLSI 2064E-200LT100
| Parameters | |
|---|---|
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000E |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2064 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 133MHz |
| Propagation Delay | 7 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 4.75V~5.25V |
| Delay Time tpd(1) Max | 4.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
ISPLSI 2064E-200LT100 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The product is contained in a 100-LQFP package.This device has 64 I/O ports programmed into it.There are 100 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.As the terminal position of this electrical part is [0], it serves as an important access point for passengers and freight.An electrical supply voltage of 5V is used to power it.It is included in Programmable Logic Devices.Trayshould be used to package the chip.Due to its reliability, it is operated at a temperature of [0].It is recommended to mount the chip by Surface Mount.As part of the ispLSI? 2000Eseries, it is a type of FPGA.It is programmed with 100 pins.This device also displays [0].According to the ISPLSI 2064, its related parts can be found.2000gates are used to construct digital circuits.There are 16 logic elements/blocks, which are fundamental building blocks of field-programmable gate array (FPGA) technology.It runs on a voltage of 5Vvolts.Vsup reaches 5.25Vas the maximum supply voltage.Ensure that the supply voltage (Vsup) exceeds 4.75V.Ideally, its clock frequency should not exceed 133MHz.
ISPLSI 2064E-200LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
5V power supplies
ISPLSI 2064E-200LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064E-200LT100 CPLDs applications.
- Reset swapping
- High speed graphics processing
- Multiple Clock Source Selection
- Software-driven hardware configuration
- Software-Driven Hardware Configuration
- Protection relays
- Code converters
- Boolean function generators
- USB Bus
- Preset swapping
