ISPLSI 2064VE-200LTN44
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e6 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Bismuth (Sn/Bi) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ISPLSI 2064 |
| Pin Count | 44 |
| JESD-30 Code | S-PQFP-G44 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 32 |
| Clock Frequency | 133MHz |
| Propagation Delay | 7 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 4.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | RoHS Compliant |
ISPLSI 2064VE-200LTN44 Overview
There are 64 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is part of the 44-TQFP package.The device is programmed with 32 I/Os.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part is wired with a terminal position of QUAD.Power is provided by a supply voltage of 3.3V volts.This part is included in Programmable Logic Devices.It is recommended that the chip be packaged by Tray.The temperature at which it operates is set to 0°C~70°C TAin order to ensure its reliability.It is recommended that Surface Mountholds the chip in place.The FPGA belongs to the ispLSI? 2000VE series.It has 44pins programmed.If you use this device, you will also find [0].ISPLSI 2064contains its related parts.For digital circuits, there are 2000gates. These devices serve as building blocks.A total of 16logic elements/blocks are present.The system runs on a power supply of 3.3V watts.Supply voltage (Vsup) reaches a maximum of 3.6V.It should be possible for Vsup to exceed 3Vat the supply voltage.Its clock frequency should not exceed 133MHz.
ISPLSI 2064VE-200LTN44 Features
44-TQFP package
32 I/Os
The operating temperature of 0°C~70°C TA
44 pin count
3.3V power supplies
ISPLSI 2064VE-200LTN44 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064VE-200LTN44 CPLDs applications.
- Reset swapping
- State machine design
- Timing control
- USB Bus
- Dedicated input registers
- Bootloaders for FPGAs
- Multiple Clock Source Selection
- Cross-Matrix Switch
- Configurable Addressing of I/O Boards
- INTERRUPT SYSTEM
