ISPLSI 2064VE-280LT100
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Published | 2000 |
| Series | ispLSI® 2000VE |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ISPLSI 2064 |
| Pin Count | 100 |
| JESD-30 Code | S-PQFP-G100 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Number of I/O | 64 |
| Clock Frequency | 182MHz |
| Propagation Delay | 5.5 ns |
| Number of Gates | 2000 |
| Output Function | MACROCELL |
| Number of Macro Cells | 64 |
| JTAG BST | NO |
| Voltage Supply - Internal | 3V~3.6V |
| Delay Time tpd(1) Max | 3.5ns |
| Number of Logic Elements/Blocks | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ISPLSI 2064VE-280LT100 Overview
There are 64 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).In the 100-LQFPpackage, you will find it.The device is programmed with 64 I/O ports.100terminations are programmed into the device.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.A voltage of 3.3V is used as the power supply for this device.It belongs to the family [0].Ideally, the chip should be packaged by Tray.The device operates at a temperature of 0°C~70°C TAin order to ensure its reliability.Surface Mountshould be used for mounting the chip.It is a type of FPGA belonging to the ispLSI? 2000VE series.There are 100pins on the chip.The device can also be used to find [0].The ISPLSI 2064shows its related parts.2000gates are used to construct digital circuits.There are a total of 16 logic elements or blocks.A total of 3.3V power supplies are needed to run it.In order to ensure proper operation, a maximum supply voltage (Vsup) of 3.6V is required.It is important that the supply voltage (Vsup) exceeds 3VV.The clock frequency of the device should not exceed 182MHz.
ISPLSI 2064VE-280LT100 Features
100-LQFP package
64 I/Os
The operating temperature of 0°C~70°C TA
100 pin count
3.3V power supplies
ISPLSI 2064VE-280LT100 Applications
There are a lot of Lattice Semiconductor Corporation ISPLSI 2064VE-280LT100 CPLDs applications.
- Digital multiplexers
- Preset swapping
- Synchronous or asynchronous mode
- Wide Vin Industrial low power SMPS
- PLC analog input modules
- Pattern recognition
- Page register
- Address decoding
- D/T registers and latches
- TIMERS/COUNTERS
